In Bilge Fender Holders??
 

Does anyone know where to get those fender holders that are mounted in the bilge, and you just slide the fender in when there not in use? I have seen them on some boats and would be interested in adding some to my boat.

Re: In Bilge Fender Holders??
 

Most are custom made out of Star board or something similar,Get a big hole saw or jig saw and cut them out. The boat builder may have a template for your boat if they did them on your style boat before but I doubt it.

Re: In Bilge Fender Holders??
 

I had them in my hustler, I would not recommend them, mine broke into little pieces from running the boat hard. and it is a pain to work on the motor with those in there.

Re: In Bilge Fender Holders??
 

West marine has some Stainless steel ones that you can mount where ever you want. It's like a heavy wire basket. When they are in your way, you simply lift the holder out of it's braket to remove.

Re: In Bilge Fender Holders??
 

I had two custom sets made, but only used one set in my Tiger. I will post a photo this weekend and would sell on set . Mine are made out of alum and I had one mine pwd coated blue the other set is still alum.

Re: In Bilge Fender Holders??
 

those are sweet JC..... make sure the lines are tucked in under the fenders though.... that belt might get hungry :eek: :D :evilb:

Re: In Bilge Fender Holders??
 

sold... alluminum is just what my playboy needs

pm me a price

Re: In Bilge Fender Holders??
 

If Dreamer doesnt end up getting them, Ill buy the blue one off you, or the Alum ones, thanks, just PM me. Jeff

Re: In Bilge Fender Holders??
 

I saw some in a new Cig at the Chicago boat show that looked like they were made from large PVC pipe.

I was going to take a fender to Menards a see what it fit in.

Re: In Bilge Fender Holders??
 

8" fender and cover i would say 10" pvc if you can find it...