Offshoreonly.com - I need help dialing in a cam, off 3 degrees

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - I need help dialing in a cam, off 3 degrees (https://www.offshoreonly.com/forums/general-q/101454-i-need-help-dialing-cam-off-3-degrees.html)

1BIGJIM

04-23-2005 02:28 PM

I need help dialing in a cam, off 3 degrees

This is the first time I have had a cam off. I always installed them straight up and the are within 1 degree.
I have a comp XM 270
Specs are for a cam installed @ 110 intake center line
Lobe Separation 112
I do the math and come up with 113 center line.
Is three degrees worth messing with. I have the hex timing set 4/2 degree changes.
Am I missing something?

GPM	04-23-2005 04:55 PM

Re: I need help dialing in a cam, off 3 degrees

I would put it in at 109 before I would run 113, it would have more bottom and mid range. only an opinion.

1BIGJIM

04-23-2005 06:00 PM

Re: I need help dialing in a cam, off 3 degrees

Come on cam experts, I am twiddleing my fingers :eek: and drinking a beer waiting for advise. :D

rmbuilder

04-23-2005 07:31 PM

Re: I need help dialing in a cam, off 3 degrees

Quote:

Originally Posted by 1BIGJIM

Come on cam experts, I am twiddleing my fingers :eek: and drinking a beer waiting for advise. :D

1BIGJIM ,
GPM has it. 109* is the number.
Bob

All times are GMT -5. The time now is 07:56 AM.