I need help dialing in a cam, off 3 degrees
04-23-2005 | 02:28 PM
#1
Thread Starter
Registered
Joined: Jun 2004
Posts: 1,949
Likes: 37
From: Omaha, Nebraska. Boat on the Mighty Mo! Longest river in the USA!
I need help dialing in a cam, off 3 degrees
This is the first time I have had a cam off. I always installed them straight up and the are within 1 degree.
I have a comp XM 270
Specs are for a cam installed @ 110 intake center line
Lobe Separation 112
I do the math and come up with 113 center line.
Is three degrees worth messing with. I have the hex timing set 4/2 degree changes.
Am I missing something?
I have a comp XM 270
Specs are for a cam installed @ 110 intake center line
Lobe Separation 112
I do the math and come up with 113 center line.
Is three degrees worth messing with. I have the hex timing set 4/2 degree changes.
Am I missing something?
04-23-2005 | 06:00 PM
#3
Thread Starter
Registered
Joined: Jun 2004
Posts: 1,949
Likes: 37
From: Omaha, Nebraska. Boat on the Mighty Mo! Longest river in the USA!
Re: I need help dialing in a cam, off 3 degrees
Come on cam experts, I am twiddleing my fingers 
and drinking a beer waiting for advise. 
and drinking a beer waiting for advise.
04-23-2005 | 07:31 PM
#4
MarineKinetics
Joined: Oct 2002
Posts: 942
Likes: 5
From: Rochester, NY
Re: I need help dialing in a cam, off 3 degrees
Originally Posted by 1BIGJIM
Come on cam experts, I am twiddleing my fingers and drinking a beer waiting for advise.
and drinking a beer waiting for advise. GPM has it. 109* is the number.
Bob
