Cig pulls left
 

Need a little guidance.

38 cig, bravo drives, no steps.

Tracks strait but when you turn left a little it wants to pull harder left. Does not do it when turning right. I am guessing one of the drives isn't set right. Where do I start? If I would let go of the wheel it would turn itself full lock.

Re: Cig pulls left
 

Maybe a skeg that's a little bent?

Re: Cig pulls left
 

Check the alignment on the drives[toe in and toe out]

Re: Cig pulls left
 

Put the beer cooler on the starboard end of the back seat.

Re: Cig pulls left
 

It's a silly question, but you have counter rotaters right?

Re: Cig pulls left
 

Yes.

Skegs are plumb. Guessing the toe is off.

Re: Cig pulls left
 

If they are counter rotaters and the skegs are straight and you have the flat plate anode not the one with the little skeg on it, then yeah the toe is probable out of wack easily adjusted with the tie bar though. And now you are going to hear about 100 diffrent opinions on how to set the toe up :D :D :D

Re: Cig pulls left
 

All of the above are correct so now...who wants to contribute to the toe set up?

Re: Cig pulls left
 

My vote is for setting both drives dead straight.

Re: Cig pulls left
 

Do you have full hydraulic or std merc or add on system,

if it is merc or add on system it could be the std merc hydraulic assist unit is not working right.