Offshoreonly.com - Bravo One oil leak- Help!

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Bravo One oil leak- Help! (https://www.offshoreonly.com/forums/general-q/102733-bravo-one-oil-leak-help.html)

Mr Gadgets

05-10-2005 04:42 PM

Re: Bravo One oil leak- Help!

DR,
It is a regualar 3/8" coarse thread. I use a 3/8" bolt with the head cut off with a hole drilled thru it to fill it.

rbtnt

05-10-2005 09:24 PM

Re: Bravo One oil leak- Help!

I took the fitting and hose off my hand pump, put a barb fitting on the hose, screwed fitting into a valve with a gauge, put an quick disconnect on the other side of the valve to connect to the air compressor.

Don't go over 10 psi!!!!

happy hours

05-11-2005 09:56 PM

Re: Bravo One oil leak- Help!

I bought a 7 dollar oil pump thing from west marine and hooked it up to a hand tire pump......cheap and easy

All times are GMT -5. The time now is 01:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page