Offshoreonly.com - Mesa Racing Engines Latest Project

Quote:

Originally Posted by Howitzers (Post 2054500)

In the 1990's Gentry built a series of twin turbo engines that held up wonderfully. I think they were 355 cid Big Blocks. Maybe tall decks with a bore of 4.25 and a stroke of 3.125 with nice long rods and they were spun up to pretty high speeds. With today's technology, these engines should be sweet. Good luck Laz!

Actually Gentry's stuff is starting to surface again.
Carson Brummett out of California has all the molds
for the turbo's ,manifold, and intercooler etc. And Carson
builds turbo engine's too.

But now your Seeing Builders such as Tommy from Chief engines using the gentry parts with his own personal combinations. Tommy had a real nice display at the Miami
boat show with one of his Turbo engine displays going in a
Nortech.
Tommy has made these all cumputerized and fuel
injected and make 1,200 hp. on 93 octane if memory serve's me, Tommy felt that turbo's are the wave of the future for big power with long term engine life.

His display was beautiful !!

Cougarman