through hull holes for exhaust?
06-28-2005 | 09:14 PM
#11
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Re: through hull holes for exhaust?
I'm going to have to make 3/8" spacers to get the angle right to hit the hole center...... 
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
06-29-2005 | 09:05 AM
#12
Registered
Joined: Apr 2002
Posts: 3,086
Likes: 0
Re: through hull holes for exhaust?
Originally Posted by RLW
An OSO member once suggested doubling up the holesaws.
Put a 4" inside a 5" and use the 4" for the pilot.
Similar to your idea.
Put a 4" inside a 5" and use the 4" for the pilot.
Similar to your idea.
06-29-2005 | 09:11 AM
#13
Thread Starter
Charter Member #655
Joined: Dec 2000
Posts: 4,939
Likes: 1
From: Holland, Michigan
Re: through hull holes for exhaust?
its realy not the diameter thats the problem its the angle of the stacks,last night I opened them up with a die grinder but in order to hit the hole center I'm going to have to make a 3/8" spacer for 3 out of 4 stacks. I dont know if the holes are off or the stacks are.....
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
Thread
Thread Starter
Forum
Replies
Last Post
handfulz28
Detailing, Painting, & Fiberglass
13
03-23-2008 09:00 PM
