Go Back  Offshoreonly.com > Technical > General Q & A
Looking for Hyd Steering >

Looking for Hyd Steering

Notices

Looking for Hyd Steering

Thread Tools
 
Old 08-02-2005 | 11:22 AM
  #1  
Craig B's Avatar
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 113
Likes: 0
From: California
Default Looking for Hyd Steering

WTB
Hydraulic Steering, or even extra components if you have them. WPM, Imco, or Marine Machine.

Trying to save a few bucks here and there on a rebuild.

Thanks in advance

Last edited by Craig B; 10-15-2010 at 04:51 PM.
Craig B is offline  
Reply
Old 08-02-2005 | 06:53 PM
  #2  
Registered
20 Year Member
 
Joined: Feb 2003
Posts: 6,192
Likes: 318
From: Lafayette,La
Default Re: Looking for Hyd Steering

what drive????
open87 is offline  
Reply
Old 08-02-2005 | 11:40 PM
  #3  
Craig B's Avatar
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 113
Likes: 0
From: California
Default Re: Looking for Hyd Steering

Sorry,

Bravo

External steering

Thanks
Craig B is offline  
Reply
Old 08-03-2005 | 12:16 AM
  #4  
FOUNTAINATLAST's Avatar
Registered
 
Joined: Aug 2004
Posts: 1,182
Likes: 0
From: Sunny, AZ
Default Re: Looking for Hyd Steering

Are you looking for the the complete unit from the helm back, or just external & still use your existing cable. I have some some new Imco units that I need to move cheap!!!
FOUNTAINATLAST is offline  
Reply
Old 08-03-2005 | 01:31 AM
  #5  
Craig B's Avatar
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 113
Likes: 0
From: California
Default Re: Looking for Hyd Steering

Assist only.
Reading page after page, leaning towards a single ram system. Only a 21 ft boat, space to mount the rams is the biggest factor, and don't wanna be to tight if using dual rams (yeah yeah, I know, full to the helm ).
Craig B is offline  
Reply
Old 08-03-2005 | 05:40 AM
  #6  
mwdill's Avatar
Registered
 
Joined: Feb 2003
Posts: 2,952
Likes: 0
From: SML VA
Default Re: Looking for Hyd Steering

Originally Posted by FOUNTAINATLAST
Are you looking for the the complete unit from the helm back, or just external & still use your existing cable. I have some some new Imco units that I need to move cheap!!!
how much?
full to helm and single.
mwdill is offline  
Reply
Old 08-03-2005 | 10:09 AM
  #7  
pachangalpina's Avatar
Registered
 
Joined: May 2002
Posts: 931
Likes: 0
From: Cumming GA
Default Re: Looking for Hyd Steering

I have a lot of misc pieces that may be of some help.

2x stainless bravo end caps (may be Fountain copy of Latham)
1x Latham hydraulic helm
3x Latham remote reservoirs (2 are new)
2x New Latham steering filters
2x new steering post

I do not have any extra rams.

Todd
pachangalpina is offline  
Reply
Old 08-03-2005 | 11:51 AM
  #8  
Registered
 
Joined: Nov 2004
Posts: 266
Likes: 0
From: Palm Coast, FL
Default Re: Looking for Hyd Steering

We Have Single Ram Add-on Mayfair Ssystems For $1295.99 On The Shelf.

HARDIN MARINE EAST
1-877-900-7278 EXT. 222
Hardin Marine is offline  
Reply
Old 08-03-2005 | 11:29 PM
  #9  
Craig B's Avatar
Thread Starter
Registered
25 Year Member
 
Joined: Oct 2000
Posts: 113
Likes: 0
From: California
Default Re: Looking for Hyd Steering

Thanks for the responses thus far. My drive is in the shop so I can't pull any measurements. DUH! I'll revisit this thread in another week or two.
Craig B is offline  
Reply
Old 08-05-2005 | 12:10 AM
  #10  
FOUNTAINATLAST's Avatar
Registered
 
Joined: Aug 2004
Posts: 1,182
Likes: 0
From: Sunny, AZ
Default Re: Looking for Hyd Steering

IMCO Single-Ram add on external steering 1255.00!!!

Give me a call at 623-693-0470
FOUNTAINATLAST is offline  
Reply


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.