cam size
#1
Charter Member #737
Charter Member
Thread Starter
cam size
How do these cams specs look for a 468, stock heads and 525SC blower/wieand 177? Comp tech line told me the cam was for a gen 6 which I had the cam in my 540 which was a mild motor. Since I have the cam looking to save a few bucks.
Also would I run into problems running stock lifters since finding aftermarket ones had been a real problem.
Part Number 11-775-8
Engine 1965-1996 Chevrolet
396ci-454ci
8cyl.
Grind Number CB XR271HR-12
Description
--------------------------------------------------------------------------------
Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.591 0.601
Duration At 0.006 Tappet Lift 271 279
--------------------------------------------------------------------------------
Valve Timing At 0.05
Open Close
Intake 1 41
Exhaust 49 1
--------------------------------------------------------------------------------
These Specs Are For The Cam Installed At 110 Intake CL
Intake Exhaust
Duration At 0.05 222 230
Lobe Lift 0.348 0.354
Lobe Separation 112
Also would I run into problems running stock lifters since finding aftermarket ones had been a real problem.
Part Number 11-775-8
Engine 1965-1996 Chevrolet
396ci-454ci
8cyl.
Grind Number CB XR271HR-12
Description
--------------------------------------------------------------------------------
Intake Exhaust
Valve Adjustment 0 0
Gross Valve Lift 0.591 0.601
Duration At 0.006 Tappet Lift 271 279
--------------------------------------------------------------------------------
Valve Timing At 0.05
Open Close
Intake 1 41
Exhaust 49 1
--------------------------------------------------------------------------------
These Specs Are For The Cam Installed At 110 Intake CL
Intake Exhaust
Duration At 0.05 222 230
Lobe Lift 0.348 0.354
Lobe Separation 112
Thread
Thread Starter
Forum
Replies
Last Post
nova26
Trucks, Trailers and Transportation
41
07-07-2008 06:10 PM