Try Bill's Marine in Ft. Lauderdale. (954) 462-1904.

Have 2 HP 465's Gen 4 Bowtie,502's $4500.00ea 500 hrs complete, freshwater, should rebuild.
Doug
PS please don't ask for pics, they are black

wkd1, looks like a nice motor, what CC are the heads intake and combustion chamber. What's the Comp Ratio, How fresh is this?

It has under 8 hrs on it....I biult it for a smaller jet boat.Then sold the boat....It hasnt been ran since the heads were done.The short block was gone thru while it was there.They set the pump up for the pan.I started to put parts together for my new boat but still not sure if its what i want I do....2002 crownline...I have only biult jet boats...This is a new area for me....if it sell then it selld no worries..Unfortunatly I have way more into to it than the 6k
The inatake manifold is the one that the carb is turned...Older victor style.
Comp ratio should be 9.6 with these heads
Part# 60459Int. port vol.290cc
Exh. port vol. 110cc
Chamb. vol. 110cc
Deck thickness-9/16
Int. valve size 2.19
Exh. valve size 1.88
Valve spring dia. 1.55
Rocker stud dia. 7/16
Pushrod dia.(A) 3/8
Max. Valve Lift .700 "
Bolt Torque (G) 70
Heads include top-quality ARP rocker studs, bronze guides and hardened, ductile iron valve seats.

I have a pair 4-6 hrs on them.Professionaly built $2400.00 just in the heads! Compression about 8.75:1 Long blocks w/ all the good components, ported dart intake to Gil. pans. Including flywheels and balancers P.M. me or call me 614 205 5401

Just saw an ad in my local paper this morning classifieds. (2)502 MAGS EFI $14,000 And also (2) 7.4L 330hps $4,500 pr both. 920-426-1402 920-203-3411 In the APPLETON,WI PAPER SO SHOULD BE FRESHWATER ENGINES.

There's a gent here in Glen Burnie that has a 500 EFI with around 75 hours on it I believe he said for around $6500.00. I think it needs a few brackets or so.

John S.