Offshoreonly.com - oil pump 10777

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - oil pump 10777 (https://www.offshoreonly.com/forums/general-q/111119-oil-pump-10777-a.html)

dodsonartic1

08-27-2005 08:15 PM

oil pump 10777

oilpump shaft about half inch to long dist . wont goin any body else have this problem

articfriends

08-27-2005 08:23 PM

Re: oil pump 10777

The drive has a six point hex and sometimes needs slight "persuasion " to go down on oil pump hex. It would have been ideal if you had fit it on BEFORE getting to this point while pan was still off but I have had same problem before,Smitty

dodsonartic1

08-27-2005 08:28 PM

Re: oil pump 10777

just how much BEATING ON IT

chuckels

08-27-2005 09:52 PM

Re: oil pump 10777

I just recently had the same problem, i took a long flat head screwdriver and slowly tapped it with a hammer as i turned it , went right on .

All times are GMT -5. The time now is 05:36 PM.