![]() |
Superchiller Question? ??
Just Came A Cross Some Money To Spend And Am Considering Installing Superchillers On My 525sc's,my Boat Is A 1998 38 Scarab!am I Going To See Any Major Changes Or Should I Spend My Money Someplace Else On Other Parts ??thanks
|
Re: Superchiller Question? ??
You will need to crank the boost up as well to see any gains. I have heard that you can get 50-60hp by doing both.
|
Re: Superchiller Question? ??
I have a pair of used intercoolers for sale. Superchillers like new. $2750.00 for the pair shipped.
|
Re: Superchiller Question? ??
I have the same motors...would love to know how this turns out for you.
I understand Tyler Crocket has a kit that can get a reliable 600 HP. Beilieve it consists of an intercooler and pully. Not sure if there is anything else. Joel BTW...I'd be willing to do this on my boat first if you like. Just send me the money! :evilb: |
Re: Superchiller Question? ??
Im interested in your 2750 deal,give me an email address to see if we can do a [email protected]
|
Re: Superchiller Question? ??
Pics sent to email.
|
Re: Superchiller Question? ??
BTW...I'd be willing to do this on my boat first if you like. Just send me the money! |
Re: Superchiller Question? ??
putting on smaller pullies make the little blowers whine very loud, i was told it could also cause bearing failure in the blower. but then i never had any trouble.
|
Re: Superchiller Question? ??
I've got 200+ hrs on my 525sc blower with a smaller pulley. Running about 7 lbs of boost. The do whine a lot, but I have not had any problems. I change the lube every 30 or so hrs.
|
Re: Superchiller Question? ??
Griff...
How much of a performance improvement did you get with the pully change? Which pully did you get...from where? Joel |
Re: Superchiller Question? ??
Meis1,Saw The Pics,Look Good,What Else Will I Need To Buy To Make Them Work On My Application(hardware,plumming,gaskets,etc)I Am Very Interested,Are They Bolt On Or Is There Some Modification Needed For A 525sc?
|
Re: Superchiller Question? ??
Originally Posted by JoelHene
Griff...
How much of a performance improvement did you get with the pully change? Which pully did you get...from where? Joel It was already on when I bought it. I don't know how long it was on prior, but the previous owner said he hadn't changed it either and he had put about 100 hrs on it. I'm not sure how much actual performance was gained over stock, since I don't have a stock pulley. The 200+ hrs is what I've put on its probably closer 300+ with what the prior owner said. He put about a 100 on it. I believe the blower is rated for up to 12000 rpm. I'm actually slightly more than that with a 2.5 ratio at 5200rpms. |
| All times are GMT -5. The time now is 07:04 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.