Re: on engine still overheats at wfo..any ideas
 

no bravo drives, i have ssm #3 drives bw trans, no eng water pump, just raw waterpump. no thermastats crossovers one engine is perfect, the other runs 20* hotter all the time and is ok to 4k rpm but starts climbig when i run it wfo. engines were dyno had .52 bcfc . only did is one engine has the power steering cooler and thats the one that gets hot but he cooler is clera the other coolers are new

Re: on engine still overheats at wfo..any ideas
 

It was asked but not answered. Do you have water pressure gauges? This is a must check item at this point. If you don't have them, get them.

Re: on engine still overheats at wfo..any ideas
 

If you have engine flushes make sure the check valve isn't clogged. I've seen this many times and it's easy to overlook.

Re: on engine still overheats at wfo..any ideas
 

It doesn't surprise me, I've read countless threads where people have cooling issues with crossover tubes. Do a search and you'll get some more ideas. Good luck.

Re: on engine still overheats at wfo..any ideas
 

water pressure gauges read 15 llbs and each engine is with in a lb or so of the other!

Re: on engine still overheats at wfo..any ideas
 

both engines are set up the same one runs nice and cool it's twi is getting hot!

Re: on engine still overheats at wfo..any ideas
 

You have a restriction somewhere. You need to find it before something bad happens. Start swapping parts or measure the pressure at various points along the waters path.

Re: on engine still overheats at wfo..any ideas
 

Maybe there is a Coney Island Whitefish clogged in your one motor pickups after you nailed that porn star on the deck of the boat. :eek: :evilb:

Re: on engine still overheats at wfo..any ideas
 

Rat ... pull the Thermo ......I agree with the other guys ....good place to start .... ..and they do hang ..even new ...

Re: on engine still overheats at wfo..any ideas
 

i am NOT running thermostats.