Re: Plumbing Superchillers
 

I would run a 1" pickup for each chiller with separate dumps out the driver side. Separate dumps allow visual comparison of the dump volume from each chiller. Go big on the pickups and braided lines. I ended up going back and upgrading to the 1" pickups and bigger lines. Just more work doing the job twice.

Re: Plumbing Superchillers
 

Cool So Far!any Others

Re: Plumbing Superchillers
 

JJONES, Give us a call and I will send you a schematic that Keith has on plumbing intercoolers. (386) 446-0660.
Thanks
Steve

Re: Plumbing Superchillers
 

When I flush I take the garden hose and stuff it up against
the transom dump and back feed it!

Re: Plumbing Superchillers
 

backflush the chiller through the dumps
and don't forget the sea strainer.
the cooler core is more than half the
cost of the whole kit, hate to see anything
get damaged because of unstrained water
OHH and if you have any questions or need
a plumbing diagram for the intercooler give
me a call and i will fax it to you
661-295-7000
Adrian

Re: Plumbing Superchillers
 

Thanks Adrian,just Got My Gaskets Today So Im Going To Finish This Week!