Exhaust Manifold Installation Help Needed
#22
Registered
Thread Starter
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Installation Help Needed
The Elbows I have are the cast stainless steel version. They look exactly like the cast iron--BUT they are solids stainless. One of them is new, the other three have minimal use and I'd rate them as 8-9's.
By the way--I've got to shed myslef of a garage full of TRS stuff an d orther unfinished projects. I've sold my warehouse.
Have 5 TRS inner transom assemblies, 4 Gimbal housing/Outer assemblies, 4 Exhaust extensions (8" long), 2 dual oil coolers, 4 TRS drives--all in need of lower housings, and a pair of TRS external steering wing plates.
If you have a need or know of anyone who does--share the info.
By the way--I've got to shed myslef of a garage full of TRS stuff an d orther unfinished projects. I've sold my warehouse.
Have 5 TRS inner transom assemblies, 4 Gimbal housing/Outer assemblies, 4 Exhaust extensions (8" long), 2 dual oil coolers, 4 TRS drives--all in need of lower housings, and a pair of TRS external steering wing plates.
If you have a need or know of anyone who does--share the info.
#23
Registered
Join Date: Jan 2004
Location: Long Island NY.
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Installation Help Needed
I already have a set of the cast stainless ones. I'm looking for tube type ones. I'll keep the parts in mind in case I hear of any one who needs anything. I work a side job at my friend's marine repair shop, and you never know who might come by needing something.
Thread
Thread Starter
Forum
Replies
Last Post
Rage
General Q & A
41
02-18-2007 09:42 PM
tomcat
General Q & A
9
07-26-2003 11:11 PM