Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Lower unit for TRS 370 (https://www.offshoreonly.com/forums/general-q/114725-lower-unit-trs-370-a.html)

kiskis haddaway 10-19-2005 04:11 PM

Lower unit for TRS 370
 
Hello everybody! Does anyone have TRS 370 lower unit for sale? Model should be stock.

MrCIG 10-19-2005 04:19 PM

Re: Lower unit for TRS 370
 
I have 2 complete TRS outdrives LH and RH rotation.
Check my add in the SWAP Section.
http://www.offshoreonly.com/classifi...1&cat=5&page=2

Mark

kiskis haddaway 10-20-2005 03:03 AM

Re: Lower unit for TRS 370
 
Thanks for offering those but now I only need one lower unit.

jpclear 10-20-2005 07:34 PM

Re: Lower unit for TRS 370
 
Would need to know if you need a R. or L. rotation lower cause that is where rotation is determined with a TRS. Also, you should know that you really shouldn't just stick a used lower on an existing upper cause bearing load shimming is finalized with that assembly and unless you are extremely lucky, you court disaster. --- Jer

kiskis haddaway 10-21-2005 01:50 AM

Re: Lower unit for TRS 370
 
You are right Jer. Thanks for a tip but now when I concider this thing, I only need gear housing assembly( not complete ), so it`s same which side it is. I have to change my own parts to that assembly. I only have skeg that is so damaged that I have to change it.

jpclear 10-21-2005 09:24 PM

Re: Lower unit for TRS 370
 
So what you really need is a lower gearCASE. Replacing that with another would still require a complete rebuild with re-shimming of gears and bearings. A real talented alum.TIG man could probably put a new skeg on your case WITHOUT a total disassembly. Or you could take it all apart and have it fixed and have someone who knows his stuff put it back together with all your original internals and the new crushable shim ring. --- jer

kiskis haddaway 10-22-2005 06:21 AM

Re: Lower unit for TRS 370
 
Well the skeg is so damaged that I would have to change cone nose and everything so it will be easier to change whole part. If you have more good tips IŽll be happy to get one. Also other drive is stock so I would like to have similar part that the other one is.

jpclear 10-22-2005 09:34 AM

Re: Lower unit for TRS 370
 
You might want to contact Mark at BAM MARINE or Chris Martin at STERNDRIVE SPECIALISTS. It is likely that they would give you an exchange deal for a whole outdrive assembly, ready to bolt on, for less $ than you could mess with it yourself. --- Jer


All times are GMT -5. The time now is 12:13 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.