Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   exhaust valves (https://www.offshoreonly.com/forums/general-q/114812-exhaust-valves.html)

jcolby 10-20-2005 06:44 PM

exhaust valves
 
Can anyone tell me if my 525efi has inconel exhaust valves?(2003)

jpclear 10-20-2005 06:51 PM

Re: exhaust valves
 
Usually uesd only in Merc's hp (blue) engines. But if you give us the eng.ser.#, we could probably tell you for sure. --- Jer

jcolby 10-21-2005 07:02 AM

Re: exhaust valves
 
The serial number is om900421 and it is a blue motor. We are installing the R-tech supercharging system and they highly recommend that it have inconel valves. Thanks for your help.

formula31 10-21-2005 11:05 AM

Re: exhaust valves
 
Ive always been told if its magnetic at one end and not magnetic at the other, its probably inconel. Thats been true for me so far on Manleys inconel.

Smitty 10-21-2005 12:34 PM

Re: exhaust valves
 
If it has aluminum heads then it should have Inconel.

Nordicflame 10-21-2005 01:59 PM

Re: exhaust valves
 

Originally Posted by Smitty
If it has aluminum heads then it should have Inconel.

Smitty,
Could you elaborate on this a bit.
Thanks,
Dave

Smitty 10-21-2005 03:09 PM

Re: exhaust valves
 
The aluminum heads used the 525's are made by Edelbrock for Mercury. They come with Ferea (sp) valves in them. This part of the reason the motors went from 500's to 525's. The aluminum makes a little more power than the cast heads do.

Nordicflame 10-21-2005 03:20 PM

Re: exhaust valves
 
Sorry Smitty,
I misread your post. Thought you were saying that aluminum heads in general should have inconel :crazy:
Agreed, the 525 Edelbrocks come with inconel (if Merc doesn't do a cost reduction here :rolleyes:

Dave

jcolby 10-21-2005 07:31 PM

Re: exhaust valves
 
So are we saying that they are inconel for sure or is there still a margin of uncertainty?

jpclear 10-21-2005 09:08 PM

Re: exhaust valves
 
My engine builder says that there in no real way to know FOR SURE if the valves in a head are Inconel or not unless you take them new out of Manley's package and install them yourself. However, if you call Merc's racing dept. with that ser.#, they will tell you what was installed from the factory. --- Jer


All times are GMT -5. The time now is 11:39 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.