|
More than likely the shift linkage assembly and detent inside the back cover of the drive needs to be replaced.
|
Originally Posted by Griff
(Post 3675572)
More than likely the shift linkage assembly and detent inside the back cover of the drive needs to be replaced.
Been here done that. Pull the back cap off and inspect the detent ball, All I did was clean it all up and regreased. Local dealer had a 10 day back order on them so this was just to get me by, three or four years later I still have the replacements in the garage shelf :) |
Originally Posted by MnFastBoat
(Post 3677601)
Exactly my thoughts and what I was going to say :)
Been here done that. Pull the back cap off and inspect the detent ball, All I did was clean it all up and regreased. Local dealer had a 10 day back order on them so this was just to get me by, three or four years later I still have the replacements in the garage shelf :) Done the same with mine this year. You would darn near break your hand to shift it. I pulled the back plate off along with dentent ball and shifting linkage. I took a round grinding stone on a die grinder and smoothed where the dentent ball rides on the recessed area of the shifting linkage. Greased it up and works like butter now. |
| All times are GMT -5. The time now is 07:19 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.