Re: SS Competition Gauges and bezels????
 

Thanks for the compliments guys. We're just trying to keep great gauges at a low cost for the masses.

The connectors are .250 spade style. Most just cut the terminals off their wires and replace them with female 0.250. You only loose about 3/8" of wire but you have a cheap new terminal that will have "new" electrical contact.

About the hour meter. You can not rotate these (desined on purpose). What I doo is keep my old meters for reference.

Hope this helps

Bob

Re: SS Competition Gauges and bezels????
 

My persoanl favorite cosmetic feature :drink:

Re: SS Competition Gauges and bezels????
 

Will the gauges work with stock mercury sending units?

Re: SS Competition Gauges and bezels????
 

Thanks Bob! I ordered new bezels and a new steering wheel today as well. Can't wait to see my updated dash.

Re: SS Competition Gauges and bezels????
 

Yes

We designed them to work with the Mercury standards.

Re: SS Competition Gauges and bezels????
 

I'm not exactly sure how the hour meters work, but I would think that you could just hook them up to a 12v power source (battery charger or something) and let them run until they got to where they needed to be. If you have 240 hours, let them run for 10 days just don't forget about them.

Bob, would that work?

Re: SS Competition Gauges and bezels????
 

Just got my garage concrete floor poured and finally got boat back in. My new dash should be done any day now. I have the new SS gauges ready to go along with bezels from Lavorsi. Can't wait to see the new dash!!!

ANYONE??? What does everyone do for re-lettering the names for the rocker switches???

Re: SS Competition Gauges and bezels????
 

Yes it would...about 6 days worth though. FYI generally they work off the 12v to the ignition system.

Re: SS Competition Gauges and bezels????
 

Which rocker switches do you have? Most of the carling type switches have caps on them that are easily removed and replaced.