![]() |
SS Competition Gauges and bezels????
I just started on redoing my dash panel and replacing gauges, looking at the SS Competion gauges. Their price seems great! Anyone have positive/negative comments on them?
What other brands would you recommend for a person on a budget? Looked at some other brands like Lavorsi.... prices are a bit on the high side. Keep in mind, I'm just an average joe boater, not out racing the circuit. Bezels, who's got the best deals??? |
Re: SS Competition Gauges and bezels????
Faria's can be had very reasonably
|
Re: SS Competition Gauges and bezels????
Bob with SS will treat you great ! Ask him about guages......
|
Re: SS Competition Gauges and bezels????
Originally Posted by East Coast B
I just started on redoing my dash panel and replacing gauges, looking at the SS Competion gauges. Their price seems great! Anyone have positive/negative comments on them?
What other brands would you recommend for a person on a budget? Looked at some other brands like Lavorsi.... prices are a bit on the high side. Keep in mind, I'm just an average joe boater, not out racing the circuit. Bezels, who's got the best deals??? Fred |
Re: SS Competition Gauges and bezels????
Ran all last year with the S & S gauges. Couldnt be happier. They work and look great.
|
Re: SS Competition Gauges and bezels????
They are good looking guages, I would have gone with them except they didn't have what I needed. I picked up a set of Livorsi's used. 2 of the guages didn't operate or read correctly, Livorsi replaced them no questions asked. The little extra for Livorsi goes a long way.
|
Re: SS Competition Gauges and bezels????
1 Attachment(s)
I have the SS gauges great bang for the buck dressed them up with red bezels.
|
Re: SS Competition Gauges and bezels????
bezels dont show up very well in the barn.
|
Re: SS Competition Gauges and bezels????
|
Re: SS Competition Gauges and bezels????
Trick, I'm going to add water pressure gauges, do you sell the sending units? Or will the oil or fuel sending units work for these gauges? What psi unit should I order? What bezels do you have in blue? Light blue, med blue, dark blue??? Think I'm looking for something in a darker blue... let me know... I also have the large black square indicator on the dash for drives and trim tabs, do you sell a bezel for that?
Big inches... looks great! Where did yo get your bezels? Are those what they term "flat" style? I've seen flat, monster and angled so far..... Thanks everyone! |
Re: SS Competition Gauges and bezels????
I got a set for Xmass for my checkmate 251
|
Re: SS Competition Gauges and bezels????
Big inches... looks great! Where did yo get your bezels? Are those what they term "flat" style? I've seen flat, monster and angled so far..... |
Re: SS Competition Gauges and bezels????
bob dropped a box of them off at our shop this summer they look darn good. he made alot of people mad when he started selling them. the big reason i beleive that they are so inexpensive is that the only person who puts their hands on them before you is bob. also bob is the type of person that will go out of his way to take care of his customers hell he might ask you if he can help you install them
|
Re: SS Competition Gauges and bezels????
I used them and could'nt be happier. Bob is great to deal with.
|
Re: SS Competition Gauges and bezels????
S&S are great, replaced mine last summer and couldn't be happier.
|
Re: SS Competition Gauges and bezels????
Man...I just found this thread. Thanks guys.
Bob |
Re: SS Competition Gauges and bezels????
Do the S&S gauges come in any other color or style than the white ones that are on the website?
|
Re: SS Competition Gauges and bezels????
I just did mine with Fred at Trick and believe me check it out before you go with anything else you can have the Lavorsi for less than you think,Plus you cannot get anybody better to deal with then Trick Marine.
Mark |
Re: SS Competition Gauges and bezels????
I met Bob and saw his gages(door prise!) at our Cleveland party. I will be redoing my dash w/in the next year and will be using his stuff. No doubt about it.
He has helped me out before, offered to help me out again, and I like to spend my money w/local people I know. He and his wife are great people. :drink: |
Re: SS Competition Gauges and bezels????
Originally Posted by century29
Do the S&S gauges come in any other color or style than the white ones that are on the website?
|
Re: SS Competition Gauges and bezels????
Originally Posted by SSComp
No we stuck with the one design to keep the price low. Our target market was for people who want to upgrade w/o spending a lot of $$$
|
Re: SS Competition Gauges and bezels????
Originally Posted by birdog
I would say you hit the target, dead on.
|
Re: SS Competition Gauges and bezels????
Originally Posted by outdrive man
bob dropped a box of them off at our shop this summer they look darn good. he made alot of people mad when he started selling them. the big reason i beleive that they are so inexpensive is that the only person who puts their hands on them before you is bob. also bob is the type of person that will go out of his way to take care of his customers hell he might ask you if he can help you install them
|
Re: SS Competition Gauges and bezels????
Hey Dyno
I just upgaded my guages to white with the red bezel.However my Depth finder is black(hummingbird I think)What type is your white one and where did you get it. Mark |
Re: SS Competition Gauges and bezels????
Just got my SS gauges last week. Dash panel is at the machine shop getting all the holes cut in.
SS.... what color do these gauges light up? And is color changeable?? Color bulbs?? |
Re: SS Competition Gauges and bezels????
email me at rogue2800 at hotmail.com. Ill send you a pic.
|
Re: SS Competition Gauges and bezels????
Originally Posted by East Coast B
Just got my SS gauges last week. Dash panel is at the machine shop getting all the holes cut in.
SS.... what color do these gauges light up? And is color changeable?? Color bulbs?? |
Re: SS Competition Gauges and bezels????
Where might one find these "rubbers"???
|
Re: SS Competition Gauges and bezels????
Originally Posted by fishead
Hey Dyno
I just upgaded my guages to white with the red bezel.However my Depth finder is black(hummingbird I think)What type is your white one and where did you get it. Mark |
Re: SS Competition Gauges and bezels????
Sorry for the delay I was overseas.
The numbers light as light green, the surround is amber. You can use lightbulb covers, I know summit racing has them for sure. The problem is that if you use red which is opposite end of the color spectrum from the green numbers, they will not light well. This very subjective though as one of my friends runs red and he is pleased with the look. I personally did not like it. |
Re: SS Competition Gauges and bezels????
Thanks! Appreciate the response!
|
Re: SS Competition Gauges and bezels????
I have red guages. Although they are nice at night (they don't blind you), I personally don't like them.
SSComp, have you ever seen a dimmer switch on dash guages? |
Re: SS Competition Gauges and bezels????
1 Attachment(s)
Thanks Bob !
|
Re: SS Competition Gauges and bezels????
Originally Posted by BajaIceBreaker
I have red guages. Although they are nice at night (they don't blind you), I personally don't like them.
SSComp, have you ever seen a dimmer switch on dash guages? |
Re: SS Competition Gauges and bezels????
You can use a dimmer. We actually chose green letters so that they do not seem bright. We tried to get a balance where you can read the meter well without being blinded.
Back lighting the letters helps this due to we are trying to light only what is needed. The perimeter light is basically just to illuminate the pointer. |
Re: SS Competition Gauges and bezels????
SScomp.... took my h20 water pressure gauge to find brass fittings, what size fitting screws to the back of the gauge for the water? Found sort of a fit, but was very loose until you got it all the way on tight. What size water line should I be using? 1/8 1/4? Do I need compression fittings or just the fittings that you slide the water hose over and secure with a tie wrap or hose clamp?
|
Re: SS Competition Gauges and bezels????
the gauge fitting is 1/8(i'm assuming npt).
1/8 hose is fine w/zip/hose clamp :D |
Re: SS Competition Gauges and bezels????
Thanks big inches...you are correct 1/8 NPT
|
Re: SS Competition Gauges and bezels????
SS Comp,
I just ordered a full set of gauges from your website. I've never had to replace my guages before, I know they are the same size and will fit where the old guages are, but will all the plugs in the back of the guages be the same as my current ones? (I have faria now) Also, can I roll the new hourmeter to match the hours that my current hourmeter shows? Thanks. Your product looks great and at a killer price. -Lance |
Re: SS Competition Gauges and bezels????
I used bobs gauges all last year, love em, no problems and they rock at night :D
|
| All times are GMT -5. The time now is 07:56 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.