280 S K-planes needed
01-12-2006 | 11:27 AM
#11
Thread Starter
Registered
Joined: Feb 2004
Posts: 182
Likes: 0
From: BELGIUM EUROPE
Re: 280 S K-planes needed
Originally Posted by zt260
Are installing new or replacing? I would buy an aftermarket set from Fred before a new S280 set. His are cheaper and better IMO.
01-12-2006 | 02:14 PM
#12
Registered
Joined: Jan 2002
Posts: 4,035
Likes: 5
From: Batavia Oh.
Re: 280 S K-planes needed
Originally Posted by evaluex
I know, I personnaly have Dana's 1000's but my client is rerigging his boat and does not want to make other holes etc in the transom... So only 280 S will fit...
Thats the great thing about tricks {One Of}...They fit the same holes !
01-12-2006 | 07:42 PM
#13
Registered
Joined: Oct 2000
Posts: 2,713
Likes: 1
Re: 280 S K-planes needed
Originally Posted by evaluex
I know, I personnaly have Dana's 1000's but my client is rerigging his boat and does not want to make other holes etc in the transom... So only 280 S will fit...
Fred
Last edited by Too Old; 10-24-2007 at 11:09 AM.
01-13-2006 | 09:35 AM
#14
Thread Starter
Registered
Joined: Feb 2004
Posts: 182
Likes: 0
From: BELGIUM EUROPE
Re: 280 S K-planes needed
Originally Posted by TRICK
Our billet tabs have the same hole pattern as a K-Plane. No new holes required, no old holes to fill. A direct bolt on replacement. Fred
But my client is ##### and only wants 280 S K's...
01-13-2006 | 03:43 PM
#15
Registered
Joined: Oct 2000
Posts: 2,713
Likes: 1
Re: 280 S K-planes needed
Originally Posted by evaluex
Thx for the info Fred..I noticed looking at you site...Very usefull info !!!
But my client is ##### and only wants 280 S K's...
But my client is ##### and only wants 280 S K's...
Might try Marc at Bam Marine.
Good Luck.
Fred
