Re: Boat Bling
 

here's the finished product of the first pic in my last post. this is a dry sump oil pump braket for the god father of power ZUL. the prince of power, J.C PERF, has also ordered 2.

Re: Boat Bling
 

Wow you do some fine work.
Great craftsmanship!

Monstaaa what is the coating on the scew terminals?


Gerry

Re: Boat Bling
 

if you do a dash likeyou show there do you splice the wires into the harness or terminate them along with the harness ?

Re: Boat Bling
 

the coating on the terminals is liquid neoprene.
as far as the wires go, they do terminate under the dash v.i.a ringlets to a terminal block. i feel use of cannon or fireplug's leave room for possible interrupt during violent impacts such as in racing or poker running. also each wire is terminal ended from pole to pole , so if there is a problem with a circuit you can change the segment of wire independently if needed.

Re: Boat Bling
 

thank you Gerry. i appreciate the comment. we do try here at monsta. this IS our PASSION!

Re: Boat Bling
 

another fresh piece

Re: Boat Bling
 

a few pieces, lioft rings, hose mounting plate, power steering resevoir braket. the p/s brcket is for a tank readily available .

Re: Boat Bling
 

heres the tank, and a set of vent covers for a 48 sun seeker super hawk.

Re: Boat Bling
 

how about a bracket that attaches across rear of motor to mount Ignition componuts on ? CKT BKR starrter solinoid ect ...

Re: Boat Bling
 

I have one on my 242ls. the prob. with it is that the thing has plywood on it and get's wet and is heavy, also cussions also get saturated. I think I might make 2 covers. with cowls built in. BBB