Boat Bling
 

looking for a few idea's, any suggestions? here's a few piece's already done.

Re: Boat Bling
 

cople more

Re: Boat Bling
 

2 more

Re: Boat Bling
 

how about 496 engine cover like what tegue is doing but nicer

Re: Boat Bling
 

o.k , give me some spec's. thickness, desighn. another word's flames or tribal. if you can make a quik sketch for me.

Re: Boat Bling
 

come on thats too much like work, I give you an idea that will sell you do the rest...........


if im going to do all that then ill do it, I was just trying to give you an idea that you could sell if marketed correctly

hell ill even sell some for you

Re: Boat Bling
 

I think what Bo is saying is that he can make anything you want. I'm sure he can make his own design and sell it.

Re: Boat Bling
 

t.y ken, . thats what i want. more than just my oppinion, more , say,,,,, vast if you will. like bringing back a chick to the frat house. not too high maintanance but not a mirror image of uncle leroy.

Re: Boat Bling
 

i" WILL" take you up on that. i have some ideas of my own. i want you to be hyped to sell something i made. i want it to be that much better than the rest.
i'll come up with something soon.

Re: Boat Bling
 

hmn...can you make me a panel? second pic shows the interior now. on the left side i need to make a panel for the top part where the gps and compass are. the first picture shows the panel that used to be there. it has all the holes you see in it. i would like to ship you the panel. you create a panel the same size, except without any of the holes but the screw holes, and move the compass hole and screw holes to the left side, and i have a template for the gps mount for you to cut on the right side. i want it made of aluminum but not painted or anything yet. if you did not understand what i said say so :D thanks

Re: Boat Bling
 

also, can you make small aluminum cup holders that are an inch shorter than normal? thanks, i need 7 i think :drink:

Re: Boat Bling
 

also i wanted to make some custom billet air scoop mesh thingys....i want them to be shiny billet w/ a bunch of air holes and also somehow incorporate the cigarette oval logo in them. heres a pic of what used to be in the air scoops thanks

Re: Boat Bling
 

you can kinda see the scoops built into the back part of the hatch, i will try to get better pics and dimensions soon. also, we are going to be adding air scoops for the blowers, and would like the pattern to continue and make the same things that could fit in the intake to them..

Re: Boat Bling
 

looking at some scoops like this, because they kind of go with the rear built in scoops if ya look at them from the side.

Re: Boat Bling
 

none of this should be a problem.
first , you said no holes in the panel but the screwholes. then move compas and"screw holes". a little un clear. not to worry. we would ask that you describe in detail exactly what YOU WANT. give us demension's. logo's, any other important criteria. we will design the art work. send it to you. upon approval of art work and agreement to price we fabricate item's needed to satisfaction.
if it is a dash panel, we can pre-wire it for you as well. also finish it. powder coated, air brushed to match graphic's, what ever. also can be engraved.
p.m me if you'd like with your phone number or call me this week .
516-799-6029.

thanyou for your interest. Bo

Re: Boat Bling
 

p.s here's a small sample of a prefab panel we wired. also another set that we airbrushe to match the graphic's on the boat.

Re: Boat Bling
 

I need a bezel to go around my Keikefer (sp) shift quadrant. Nobody makes them. :(

Re: Boat Bling
 

How about an engine oil cooler that looks good enough to leave simply polished, that will mount on a sringer or bulkhead with a slip plate arangemnt. A single bolt to hold the slip plates together so the engine can be removed with out breaking any lines. Maybe a filter and or thermostat incorporated as well.

What you've made looks great.

Re: Boat Bling
 

the Damn is cracking ...... :D

Re: Boat Bling
 

great suggestion's , keep them coming. it help's hone idea's to make or come up with useable item's. going to sart working on some of these ideas. and thank you for the possitive comment's, there greatly appreciated.

Re: Boat Bling
 

How about some hinges like this, only longer, so the deck doesn't need to be reinforced like I had to do.

Re: Boat Bling
 

is this photo of a formula? and yes.

Re: Boat Bling
 

Yes it is, I can't even find these sorry ones anywhere. :(

Re: Boat Bling
 

sure we can make em. :D

Re: Boat Bling
 

monstaa did ya get the pm i sent ya with a very rough picture of the panel we are trying to make? ill call ya this weekend, and get it all straight. were not ready for the billet scoop inserts yet, but would like to order the panel, and shortened cup holders once i get exact dimensions. how long would it take you to make the panel and cup holders? and how long roughly to draw up an original pattern like one for the scoop inserts and make it? thanks

Re: Boat Bling
 

i did get the e-mail , but there were no attachment's or drawing's.

Re: Boat Bling
 

give me somw dimensions, and we will. shoot me a p.m or give me a call 516 799 6029

Re: Boat Bling
 

thankyou, and were actually searching for some unique materials to use for just such a n application(the cooler) but , more importantly how many do you need? :eek:

just kiidin, p.m me your # or call me 516 799 6029 or anyone else for that matter.

thanx again for the positive input. one and all. :D

Re: Boat Bling
 

some more bling

Re: Boat Bling
 

hot off the press

Re: Boat Bling
 

here's the finished product of the first pic in my last post. this is a dry sump oil pump braket for the god father of power ZUL. the prince of power, J.C PERF, has also ordered 2.

Re: Boat Bling
 

Wow you do some fine work.
Great craftsmanship!

Monstaaa what is the coating on the scew terminals?


Gerry

Re: Boat Bling
 

if you do a dash likeyou show there do you splice the wires into the harness or terminate them along with the harness ?

Re: Boat Bling
 

the coating on the terminals is liquid neoprene.
as far as the wires go, they do terminate under the dash v.i.a ringlets to a terminal block. i feel use of cannon or fireplug's leave room for possible interrupt during violent impacts such as in racing or poker running. also each wire is terminal ended from pole to pole , so if there is a problem with a circuit you can change the segment of wire independently if needed.

Re: Boat Bling
 

thank you Gerry. i appreciate the comment. we do try here at monsta. this IS our PASSION!

Re: Boat Bling
 

another fresh piece

Re: Boat Bling
 

a few pieces, lioft rings, hose mounting plate, power steering resevoir braket. the p/s brcket is for a tank readily available .

Re: Boat Bling
 

heres the tank, and a set of vent covers for a 48 sun seeker super hawk.

Re: Boat Bling
 

how about a bracket that attaches across rear of motor to mount Ignition componuts on ? CKT BKR starrter solinoid ect ...

Re: Boat Bling
 

I have one on my 242ls. the prob. with it is that the thing has plywood on it and get's wet and is heavy, also cussions also get saturated. I think I might make 2 covers. with cowls built in. BBB