Re: Pressue relief valves?
 

What size hose is used for the dump?

Thanks,

Kurt

Re: Pressue relief valves?
 

kurt the mercs use a 1" hose to bleed off the water pressure quickly, the other vaalves are for biolers and are not the best setup the mercs work prefectly

Re: Pressue relief valves?
 

Thanks Ratman!!!!

Re: Pressue relief valves?
 

:d

Re: Pressue relief valves?
 

Ok Fred,
what is the deal on these??? New item?? What psi? How big are they (hose size)? Etc... Oh yeah the big question... $$?

Thanks
Dick

Re: Pressue relief valves?
 

Fuel filter?? :eek:

Re: Pressue relief valves?
 

those are the kpm valves i think sterling is using them and the kpm 2 stage pumps on their supercharged engine packages. they use a 3/4 hose i think

Re: Pressue relief valves?
 

Looks like you have to "Tee it in" somewhere along the water circuit and discharge overboard.
It is pretty.

Re: Pressue relief valves?
 

Do you still have these?
I tried to e-mail you and PM you but you have blockers inplace.

Re: Pressue relief valves?
 

I just had the Mercury valves installed. The builder said they fit better than the others would? They were $290 each! He cut the springs to allow about 12 psi through. I hope this will be enough?