Crankcase Ventilation question
02-28-2006 | 04:01 PM
#13
Thread Starter
Registered
Joined: Jun 2005
Posts: 27
Likes: 1
From: Lake Dallas, Texas
Re: Crankcase Ventilation question
Originally Posted by GOODT
couldnt miss it, two hoses coming from flame arestor,"where do these go??? well I'll just remove them no one will notice.... )
Well there wasn't, thats why the last set up had the vent hoses to the flame arrestor. (duh)
I talked to Eddie Marine today and bought the high rise breathers they have.
02-28-2006 | 08:27 PM
#14
Registered
Joined: Apr 2005
Posts: 2,675
Likes: 0
From: KENT ISLAND, MARYLAND
Re: Crankcase Ventilation question
Originally Posted by Joyride
Their response was "we thought there would be plenty of ventilation from the pcv from the case to the intake manifold"
Well there wasn't, thats why the last set up had the vent hoses to the flame arrestor. (duh)
I talked to Eddie Marine today and bought the high rise breathers they have.
Well there wasn't, thats why the last set up had the vent hoses to the flame arrestor. (duh)
I talked to Eddie Marine today and bought the high rise breathers they have.
hate to put a shop down but would suggest you find a new shop/ tech
you have too nice of a boat to risk with people like that........
oh and there is no pcv for the crackcase to the intake on that mtr
Last edited by GOODT; 03-01-2006 at 06:23 PM.
