Offshoreonly.com - Solid Motor mounts

Page 3 of 3

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Solid Motor mounts (https://www.offshoreonly.com/forums/general-q/126132-solid-motor-mounts.html)

Dave M

03-30-2006 02:24 PM

Re: Solid Motor mounts

Quote:

Originally Posted by Phazar454Mag

I have bought a Formula 292 Fastech without engines installed, but I got 2 new blue Scorpion engines in crates that I am going to install. The mounts are from Gil and I guess you would call them "solid mounts", but how do I align the new engines using these Gil mounts ? Can I simply loosen the bolts, adjust and tigthen ? Or are shims required for alignment ?
Thanks.

The mounts came with the boat? If so, and it had SBC's before, the mounts should already be lined up.

Phazar454Mag

03-30-2006 02:36 PM

Re: Solid Motor mounts

Quote:

Originally Posted by Dave M

The mounts came with the boat? If so, and it had SBC's before, the mounts should already be lined up.

Yes, the mounts came with the boat. The factory installed SBC's (used to be 350 Magnum MPI's) from Formula were in the boat the first time I saw it. When I decided to buy it the engines had been removed to prepare the upgrade to Scorpion engines. So I assume that the mounts are factory aligned to SBC's. Just wondering whether there could be small differences between engines such that alignment is required ?

All times are GMT -5. The time now is 09:42 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page