|
Re: techs/ mechanics what is your most used tool
Originally Posted by LapseofReason
I am with you on that but I don't trade up just ad, I got 2 9.6 impacts 1 drill, 1 12 impact 1 drill, 1 18 volt impact 1 drill. And I first on the list for the new 24 volt impact. But I must say the Stylus pen light gets used a bunch too.
I have the 18v drill also and the light along with 3 batts and two chargers (one for the shop and one on an inverter in the truck) you deff got me beat in the number on hand, just never felt a need to keep the smaller ones, just gave my 14v drill to a buddy have had it under the bench collecting dust forever |
Re: techs/ mechanics what is your most used tool
got the 9.6 3/8, the 12 volt 3/8, 18 volt 1/2.....holding out on the drill......until tomorrow.....maybe!! :rolleyes:
|
Re: techs/ mechanics what is your most used tool
Originally Posted by R Addiction
Plus the box looks coooooooool!!! :cool:
|
Re: techs/ mechanics what is your most used tool
1 Attachment(s)
Originally Posted by docmanrich37
R where's the lap top go inside the box ? :D
|
Re: techs/ mechanics what is your most used tool
2 Attachment(s)
Originally Posted by rouxsterre
The smallest ( 6.5" ) Channel-lock plier.
A good Leatherman. And I agree with the torch. A pic of my box, I was like a proud daddy when I first got it! It's a little dusty right now, until the boat gets gel, then it will get a wash and wax. The cordless impact driver is incredible, I would have bought one, but I already own a number of 18V De Walt tools. Most used tool......10lb sledge :D :D |
Re: techs/ mechanics what is your most used tool
i am a Snap On tool dealer. i would say that the most sold tool is the 9.6 to18 volt 3/8 and 1/2 drive impacts, handy for just about anything. there is a new 1/4 or quick release coming soon should be great for boat stuff.
|
Re: techs/ mechanics what is your most used tool
In my transmission business the most used tool is a 3/8 drive matco impact and a 10 & 13 mm socket. The most USEFUL tool I have is a snapon mt2500 scanner,Smitty
|
Re: techs/ mechanics what is your most used tool
Originally Posted by articfriends
In my transmission business the most used tool is a 3/8 drive matco impact and a 10 & 13 mm socket. The most USEFUL tool I have is a snapon mt2500 scanner,Smitty
|
Re: techs/ mechanics what is your most used tool
have used modus very nice really only a snap on style lap top
a cross between a lap top and a scanner, I like my rinda program better easier to use and uses a real lap top |
Re: techs/ mechanics what is your most used tool
Why in the hell does it take so long for Snap On to build a box, I ordered a new KLR 1024 with a custom lay out and it's going to be about 13 weeks till I see it.
Originally Posted by cosmic12
i am a Snap On tool dealer. i would say that the most sold tool is the 9.6 to18 volt 3/8 and 1/2 drive impacts, handy for just about anything. there is a new 1/4 or quick release coming soon should be great for boat stuff.
|
| All times are GMT -5. The time now is 08:44 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.