Fuel flow sensor, will it work with my setup?
04-03-2006, 03:25 AM
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: Stockholm, Sweden
Posts: 1,229
Likes: 0
Received 0 Likes
on
0 Posts
Fuel flow sensor, will it work with my setup?
I have been looking at the Lowrance EP-10 fuel flow sensor that hooks up to their plotters (Just bought the Lowrance 6500C).
Some info about the sensor:
3/8" tubing
0.5psi back pressure at 20 gallons/hour
1.0psi back pressure at 40 gallons/hour
Measure range: 0.6-45 gallons/hour (It works outside the range as well)
The engine will at WOT need about 75 gallons/hour.
Will this sensor work with my setup?!
Some info about the sensor:
3/8" tubing
0.5psi back pressure at 20 gallons/hour
1.0psi back pressure at 40 gallons/hour
Measure range: 0.6-45 gallons/hour (It works outside the range as well)
The engine will at WOT need about 75 gallons/hour.
Will this sensor work with my setup?!
