Go Back  Offshoreonly.com > Technical > General Q & A
Hatch lift and dead batts? >

Hatch lift and dead batts?

Notices

Hatch lift and dead batts?

Thread Tools
 
Old 04-10-2006, 09:03 PM
  #1  
Registered
Thread Starter
 
Join Date: Feb 2005
Location: Atlanta
Posts: 1,897
Likes: 0
Received 123 Likes on 56 Posts
Default Hatch lift and dead batts?

I am wondering what some of you do. If your batteries go dead on you or if you have an electrical problem, how do you open the hatch. I'm currently installing a new lift mtr and wiring it up. I thought about an extra terminal mounted under the seat leading to the mtr or a quick disconnect cable attached to the pin on the hatch bracket.

Surely someone has this problem solved.
tomcei is offline  
Old 04-10-2006, 09:08 PM
  #2  
Geronimo36
Gold Member
 
Panther's Avatar
 
Join Date: Sep 2002
Location: Elkton, MD
Posts: 11,972
Received 131 Likes on 36 Posts
Default Re: Hatch lift and dead batts?

I made a pull pin attached to a SS cable that you can access by taking the 6 screws that hold the air vent on the side of the boat. Pull the vent off, pull the cable and you're in.
Panther is offline  
Old 04-10-2006, 09:25 PM
  #3  
Registered
 
Join Date: Nov 2000
Location: LOTO
Posts: 255
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Hatch lift and dead batts?

I can turn my switches off and have a set of cables that are hooked to the battery that powers the hatch and a pull pin just in case.
fstboater is offline  
Old 04-10-2006, 09:25 PM
  #4  
Registered
 
Join Date: Jan 2004
Location: Saint Petersburg Fl
Posts: 1,571
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Hatch lift and dead batts?

A buddy of mine has a electric hatch and his allows the cylinder to open and lift away, allowing you to muscle it open. I take it not all lifts are that way?
happy hours is offline  
Old 04-10-2006, 09:41 PM
  #5  
Charter Member
Charter Member
iTrader: (1)
 
Ted G's Avatar
 
Join Date: Jan 2001
Location: Edgerock Baby!!
Posts: 7,663
Likes: 0
Received 1 Like on 1 Post
Default Re: Hatch lift and dead batts?

I feed my panel with a jumper box and open it normally. This wont work if the ram goes bad so I am thinking of adding a cable/pin deal also.
__________________
Chesapeake Bay Powerboat Association
www.cbpba.com
Ted G is offline  
Old 04-10-2006, 09:43 PM
  #6  
Registered
Thread Starter
 
Join Date: Feb 2005
Location: Atlanta
Posts: 1,897
Likes: 0
Received 123 Likes on 56 Posts
Default Re: Hatch lift and dead batts?

My pull pin has a button that needs to be depressed to relax the small ball bearings( qty2) in the end so it will pull out.

Panther, is yours like that?
I guess I can look for a different style pull pin that might be more accomodating (sp) Otherwise, I need to rig up somethig to push the button and pull the pin at the same time
tomcei is offline  
Old 04-10-2006, 10:51 PM
  #7  
Registered
 
Join Date: Nov 2000
Posts: 2,286
Received 8 Likes on 6 Posts
Default Re: Hatch lift and dead batts?

bring a new charged 12 volt battery into the cabin or wherever your access is to the back of the switch to raise the hatch. Use allegator clips to the back of the switch or board to supply fresh power to up switch.
ActiveFun is offline  
Old 04-11-2006, 04:59 AM
  #8  
Gold Member
Gold Member
 
Iggy's Avatar
 
Join Date: Jan 2001
Location: Kissimmee, Florida
Posts: 4,155
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Hatch lift and dead batts?

My Formula engine hatch has a separate aluminum frame that's hinged at the rear. I can lift the hatch manually or power it up. Nice feature if the battery dies.
Iggy is offline  
Old 04-11-2006, 05:43 AM
  #9  
Registered
 
mwdill's Avatar
 
Join Date: Feb 2003
Location: SML VA
Posts: 2,952
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Hatch lift and dead batts?

i can pull a piece of the back bench off and reach thru a designed hole to the pin and pull it out and lift manually.
mwdill is offline  
Old 04-11-2006, 06:14 AM
  #10  
Registered
 
GOODT's Avatar
 
Join Date: Apr 2005
Location: KENT ISLAND, MARYLAND
Posts: 2,675
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Hatch lift and dead batts?

back feed with jump pack though lighter/aux socket

or if you own a fountain you dont have that problem, they have jump cable hook up under the seat
GOODT is offline  


Quick Reply: Hatch lift and dead batts?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.