headers on a 500efi
04-12-2006, 01:54 PM
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Tampa,Fl.
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
headers on a 500efi
I was told the header bolts need to be tightned every 20-25 hrs of use. Is this true or could this person be covering something up? Its a new motor, but I never heard that before.
04-12-2006, 03:42 PM
#2
Offshore Cowboy
Platinum Member
Re: headers on a 500efi
check'en them at every oil change is never a bad idea (along w/ all of the other nuts/bolts -- especially the throttle cable linkage on the motor -- i had the nut/bolt come loose a couple times on my old 500EFI's-- lock-tited the bolt w/ the semi-breakable, or whatever it's called). it only takes a few min's.
to respond to the latter..... yep - lawsuit abuse!!!!!
Joe
to respond to the latter..... yep - lawsuit abuse!!!!!
Joe
