HP estimate??
05-13-2006 | 09:39 AM
#1
Thread Starter
Registered
Joined: Sep 2005
Posts: 164
Likes: 0
HP estimate??
My motor now:
Chevy Bowtie Block
502 Marine HP Heads (Fresh springs and conical valves)
Roller Rockers BB 1.7 "PRO SERIES"
Edlebrock Airgap RPM intake manifold
502/502 cam from crate motor
SRP lightweight flat tops
Dimple Rods
Holly 850 Double Pumper
Anyone want to make a HP estimate???
Chevy Bowtie Block
502 Marine HP Heads (Fresh springs and conical valves)
Roller Rockers BB 1.7 "PRO SERIES"
Edlebrock Airgap RPM intake manifold
502/502 cam from crate motor
SRP lightweight flat tops
Dimple Rods
Holly 850 Double Pumper
Anyone want to make a HP estimate???
05-13-2006 | 01:12 PM
#2
Registered
Joined: Sep 2004
Posts: 362
Likes: 0
From: Torrance, California
Re: HP estimate??
Longrange4u,
I guess I'll look for the answer to my HP question here
Have you ran it yet. I even noticed that engine came with exhaust...not a bad find by the looks of it. 
I guess I'll look for the answer to my HP question here
Have you ran it yet. I even noticed that engine came with exhaust...not a bad find by the looks of it.
Last edited by vandeano; 05-13-2006 at 01:14 PM.
05-15-2006 | 12:50 PM
#6
Registered
Joined: Jun 2004
Posts: 1,949
Likes: 37
From: Omaha, Nebraska. Boat on the Mighty Mo! Longest river in the USA!
Re: HP estimate??
This was in a previous post on my 496. I am running a 750 Demon Double Pumper
This is based on 496 inches at 5400rpm max
Total airflow requirements:
658.75 cfm
49.49 pounds of air.
3.36 pounds of fuel
Fuel Supply requirements:
0.56 gallons per minute for 14.7 A/F ratio.
38.66 gallons per hour for 12.8 A/F ratio.
146.33 liters per hour for 12.8 A/F ratio.
Here is the link http://www.smokemup.com/auto_math/airflow.php
the plus 15% is for marine applications based on what I have seen in this forum
This is based on 496 inches at 5400rpm max
Total airflow requirements:
658.75 cfm
49.49 pounds of air.
3.36 pounds of fuel
Fuel Supply requirements:
0.56 gallons per minute for 14.7 A/F ratio.
38.66 gallons per hour for 12.8 A/F ratio.
146.33 liters per hour for 12.8 A/F ratio.
Here is the link http://www.smokemup.com/auto_math/airflow.php
the plus 15% is for marine applications based on what I have seen in this forum
