Need PN for 30 PSI block bypass
#1
Registered
Thread Starter
Need PN for 30 PSI block bypass
I think my computer has been drinking. It seems to have lost the PN and source for the 30 PSI bypass valve for a 502. Anyone know where to get one?
Thanks,
Tim T.
Thanks,
Tim T.
#2
Registered
Thread Starter
Re: Need PN for 30 PSI block bypass
I should add that this is a Gen IV. Engine builder says they cannot be re-installed. He had to remove it to clean engine after a rod bearing problem. Do I only need one? I recall an article about an 11 PSI and a 30 PSI, one for filter and one for cooler.
#3
Registered
iTrader: (1)
Re: Need PN for 30 PSI block bypass
Article and part # is for the Gen V and VI since they are in oil filter pad, not the oil filter adapter like the Mark IV's.
Here's Scoggin Dickey's article:
http://www.sdpc2000.com/faq/kbhowto.asp?mt_sc=1
Here's Scoggin Dickey's article:
http://www.sdpc2000.com/faq/kbhowto.asp?mt_sc=1
Thread
Thread Starter
Forum
Replies
Last Post
THEJOKER
General Boating Discussion
10
09-13-2002 02:41 PM