Bravo & TRS
06-01-2006 | 03:19 PM
#3
Registered
Joined: Oct 2000
Posts: 359
Likes: 0
From: Austin, TX
Re: Bravo & TRS
However...
...I learned with my TRS drives that some of the modern Bravo props didn't work as well as I would have hoped on the TRS. When I went back to an older style round ear type of prop I got better results. I attributed it to the hydrodynamics of the TRS maybe being different enough relative to how the newer props are designed.
...I learned with my TRS drives that some of the modern Bravo props didn't work as well as I would have hoped on the TRS. When I went back to an older style round ear type of prop I got better results. I attributed it to the hydrodynamics of the TRS maybe being different enough relative to how the newer props are designed.
06-01-2006 | 08:01 PM
#5
Registered
Joined: Feb 2002
Posts: 763
Likes: 0
From: Honeoye, NY
Re: Bravo & TRS
Best call Julie or Matt at Throttle-Up. I'm running one of their Hydromotive "custom" cleavers on my TRS with FANTASTIC results. You will need to give them lots of basics. P.S. height; RPM's you want to run; etc; etc! The cost of the call is cheap --- Their knowledge is PRICELESS! --- Jer
Thread
Thread Starter
Forum
Replies
Last Post
SUPER AIR
General Boating Discussion
10
08-24-2006 06:47 AM
