Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Trim indicator cable (https://www.offshoreonly.com/forums/general-q/132318-trim-indicator-cable.html)

wrenchman 06-09-2006 08:18 AM

Trim indicator cable
 
After installing an ext. box, my trim indicator cable is too short.
I have not changed one before. How do I replace it with a longer one? Where do I get one? I noticed that the clamp that fastens the cable to the cyl. is tig welded onto the cable end, so I assume that the cable is specifically made for a trim indicator.

CIG3 06-09-2006 03:25 PM

Re: Trim indicator cable
 
Morse 33C Cable. Find a place on the cable inside the boat the number on it will tell you the length. Go to west marine or boater world, they usually have a good selection.

mr_velocity 06-09-2006 09:19 PM

Re: Trim indicator cable
 

Originally Posted by CIG3
Morse 33C Cable. Find a place on the cable inside the boat the number on it will tell you the length. Go to west marine or boater world, they usually have a good selection.

Great cable, but I like the Morse Supreme 33C a little better. West Marine also carries these and if not they can order them for you.


All times are GMT -5. The time now is 01:56 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.