Trim indicator cable
#1
Registered
Thread Starter
Join Date: Aug 2004
Location: Salem, NY
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
Trim indicator cable
After installing an ext. box, my trim indicator cable is too short.
I have not changed one before. How do I replace it with a longer one? Where do I get one? I noticed that the clamp that fastens the cable to the cyl. is tig welded onto the cable end, so I assume that the cable is specifically made for a trim indicator.
I have not changed one before. How do I replace it with a longer one? Where do I get one? I noticed that the clamp that fastens the cable to the cyl. is tig welded onto the cable end, so I assume that the cable is specifically made for a trim indicator.
#2
Registered
Re: Trim indicator cable
Morse 33C Cable. Find a place on the cable inside the boat the number on it will tell you the length. Go to west marine or boater world, they usually have a good selection.
#3
Re: Trim indicator cable
Originally Posted by CIG3
Morse 33C Cable. Find a place on the cable inside the boat the number on it will tell you the length. Go to west marine or boater world, they usually have a good selection.