I have searched and searched and keep coming up empty.

I am removing the m-3 that is on my Hp 500 EFI and don't have any of the parts (bought the boat used) that go back on to make the motor "factory".

Can someone list for me the parts I will need to locate to do the transformation?

Thanks!

Anyone? How about a reputable shop you could direct me to that would give me the info?

I can't recall off the top of my head, but I will take a look tonight @ my M3SC equipped HP 500 carb. I may have some brackets you need.Are you going back to the OEM cooling or retaining the cross-over?

I have the serpentine pulley for the crank at the shop. I'll take $75.00 for that. I may have other stuff also, I'll have to take a look around and let you know.

John S.

Thanks for the help.

E-mail me what you have ...

[email protected]

Boat Works in Ridgland MS has a bunch of left over take off stuff.

ask for Daryl or Dewitt

http://boatworks.net/home.htm

601-853-1007 voice 601-898-8479 fax

a few
crank pully
fuel lines
fuel cooler
brackets.

the also have 2bar,3 bar maps,injectors for the larger kits

Thanks for the help.

I have been calling the # below and it just rings and rings, but I'll keep trying.

Keep trying it just 2 guys there now and there part time.They may be at a race also?

Just spoke to Daryl and he is working on a project right now, but will take the time to look around the shop and locate the parts tomorrow.

Thanks for the help!

cool . Did he ask were ya got the # Hope he takes care of ya .

Rob