Would this be enough lift?
06-27-2006, 09:48 AM
#1
Registered
Thread Starter
Would this be enough lift?
It's a Formuls F402sr1 1984. Is a 12,500lb lift enought for this boat? Have gotten conflicting info. Formula says 9500lb dry, but is this real?
Thanks
Thanks
06-27-2006, 09:53 AM
#2
VIP Member
VIP Member
Re: Would this be enough lift?
Originally Posted by scottc
It's a Formuls F402sr1 1984. Is a 12,500lb lift enought for this boat? Have gotten conflicting info. Formula says 9500lb dry, but is this real?
Thanks
Thanks
Get a minimum of a 15K or an 18K lift.
__________________
Happily retired and living in Heavens waiting room.
Happily retired and living in Heavens waiting room.
06-27-2006, 11:41 AM
#3
Registered
Join Date: Aug 2004
Location: Fairhaven, MD.
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Re: Would this be enough lift?
I have a '97 straight hull 38 Top Gun. It's a HEAVY boat but I'm guessing yours a little heavier. I have a 12500 lb lift. It is right on the edge. With full fuel, I have a hard time lifting the boat up real high as the wire spool gets bigger. I would think you should go for the 15,000 lb lift.
06-27-2006, 11:54 AM
#4
Registered
Join Date: Mar 2004
Posts: 8,170
Likes: 0
Received 0 Likes
on
0 Posts
Re: Would this be enough lift?
Originally Posted by scottc
It's a Formuls F402sr1 1984. Is a 12,500lb lift enought for this boat? Have gotten conflicting info. Formula says 9500lb dry, but is this real?
Thanks
Thanks
Is that the same one that GregP sold to InspectTed?
06-27-2006, 03:28 PM
#5
Platinum Member
Platinum Member
Re: Would this be enough lift?
Can you pull the boat over a scale?
If the lift will be enough or not depends on how conservative the manufacturer is with their numbers.
If the lift will be enough or not depends on how conservative the manufacturer is with their numbers.
