Trying to find correct coupler p/n
07-19-2006 | 06:37 AM
#11
Platinum Member
Joined: Nov 2002
Posts: 2,399
Likes: 1
From: LONG ISLAND/LAKE MURRAY
Re: Trying to find correct coupler p/n
Originally Posted by duunoit
I think the A11 is the one that Merc uses in the HP500s. I'd say for cloudmaster_321, the A9 would be sufficient.
Cloudmaster, I may have a good used A9 for you.
07-19-2006 | 01:09 PM
#12
Thread Starter
Registered
Joined: Jun 2004
Posts: 1,144
Likes: 15
From: Sun Prairie, WI
Re: Trying to find correct coupler p/n
i was planning on purchasing one this winter and changing it out. Just trying to get my ducks in a row before hand. I thought my local shop told me $360 for the coupler, just trying to see if i can get it for cheaper off the net.
07-19-2006 | 01:28 PM
#13
Registered
Joined: Apr 2003
Posts: 877
Likes: 0
From: Knoxville, TN
Re: Trying to find correct coupler p/n
I saw this one on ebay...
http://cgi.ebay.com/ebaymotors/ws/eB...m=130008050612
there are usually some of the Sierra ones on there, but I don't know what kind of quality they are. This one says HP, but it doesn't look like it (no snout).
http://cgi.ebay.com/ebaymotors/ws/eB...m=130008050612
there are usually some of the Sierra ones on there, but I don't know what kind of quality they are. This one says HP, but it doesn't look like it (no snout).
