Gates Belts
07-28-2006 | 11:05 AM
#1
Thread Starter
Registered
Joined: Dec 2003
Posts: 1,991
Likes: 13
From: Socialist Republic of Washington State
Gates Belts
Does anyone have a online source to buy Gates belts? I need several odd lenghts but have the part Numbers. Google only gives reference sites or pep boys kind of sites.
07-28-2006 | 06:00 PM
#2
Registered
Joined: Apr 2005
Posts: 2,675
Likes: 0
From: KENT ISLAND, MARYLAND
07-28-2006 | 06:09 PM
#3
Rob
Joined: Aug 2001
Posts: 21,637
Likes: 12
From: Ms
Re: Gates Belts
I buy the Napa belts .I thought they were made by Gates. The will take them back is the fray or break etc.Unless ya got a weird size???
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
08-01-2006 | 02:26 PM
#4
Charter Member # 55
Joined: Oct 2000
Posts: 20,241
Likes: 2,490
From: Omaha/LOTO
Re: Gates Belts
The numbers on Gates and Napa belts are nearly the same except for or prefix or ending #. Either Napa or O'reily's(for Gates) can pretty much get you whatever sizes you need if you have the belt number.
08-02-2006 | 10:59 AM
#5
Registered
Joined: Aug 2003
Posts: 76
Likes: 0
From: St. Pete, Fl
Re: Gates Belts
I believe the numbering is related to the belt length for Dayco, NAPA, and Gates. I use the 17 series as they are a little thicker, 15's are smaller. The last numbers are the belt length...Pretty sure it's Metric.
08-02-2006 | 11:01 AM
#6
Charter Member #34
Joined: Oct 2000
Posts: 7,151
Likes: 2
From: Beautiful North Carolina
Re: Gates Belts
I am an authorized Gates distributor.
Call or email me and I will be glad to help you out.
Mark Terry
[email protected]
Allied Bearings & Supply 1-800-293-2930
Call or email me and I will be glad to help you out.
Mark Terry
[email protected]
Allied Bearings & Supply 1-800-293-2930
08-02-2006 | 12:24 PM
#7
Registered
Joined: Aug 2001
Posts: 32
Likes: 0
From: Sacramento, CA
Re: Gates Belts
Anyone need a 12-rib
Part # on belt DB6701-12
other info on belt "MADE IN CANADA 268 BC 65-0"
This belt came from ATI with M3 purchased years ago, never installed, as it was either too long or too short for my installation.
Part # on belt DB6701-12
other info on belt "MADE IN CANADA 268 BC 65-0"
This belt came from ATI with M3 purchased years ago, never installed, as it was either too long or too short for my installation.
08-05-2006 | 12:20 AM
#9
Thread Starter
Registered
Joined: Dec 2003
Posts: 1,991
Likes: 13
From: Socialist Republic of Washington State
Re: Gates Belts
Originally Posted by Dock Holiday
I am an authorized Gates distributor.
Call or email me and I will be glad to help you out.
Mark Terry
[email protected]
Allied Bearings & Supply 1-800-293-2930
Call or email me and I will be glad to help you out.
Mark Terry
[email protected]
Allied Bearings & Supply 1-800-293-2930
Sent an e-mail with what I am looking for, Can you help?
