![]() |
Re: uneven boat
Originally Posted by EYEBURN
i think everyone is mis-understanding the actual issue.
these boats are just leaning while sitting in place anchored, floating or at idle. so wind could be an issue but i have it completely ruled out. its definately not wind. wieght distribution of some kind is most likely the issue but where and why? tabs and outdrive shouldnt be the issue because it is that way while not in gear or in any sort of current such as a river etc. hope this is clear, just want to go inthe right direction. thanks kevin its worse when trim is down and lower rpms when i open it up and trim it all the way up some of it comes out but still leans |
Re: uneven boat
thanks for all the help
this weekend i took off the 28 labbed and put on the stock 26 and it worked fine im not sure what happened to the labbed but i will send it off to get reworked |
Re: uneven boat
So it was a ' while running' problem, not an 'at rest' problem you have been conserned with????
Good to hear all is good. And simple too! |
Re: uneven boat
Originally Posted by US1 Fountain
So it was a ' while running' problem, not an 'at rest' problem you have been conserned with????
Good to hear all is good. And simple too! are you the one with a 35 fountain with twin 500efi in it that was at dale hollow last labor day weekend |
Re: uneven boat
No. Haven't left IN. all summer. Mines a 32'. We are planning to be at LC for the run though as specators: 42 Fountain triple 525SC and a 442 Baja, triple 575 SC's.
|
Re: uneven boat
Originally Posted by US1 Fountain
No. Haven't left IN. all summer. Mines a 32'. We are planning to be at LC for the run though as specators: 42 Fountain triple 525SC and a 442 Baja, triple 575 SC's.
we have a seasonal campsite close to grider hill and i keep the boat down there look me up and say hello the skater i will be on was the origanal color me bad |
| All times are GMT -5. The time now is 10:03 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.