HELP! Have Pair Racing Props Don't know what drive they fit
#1
Registered
Thread Starter
Join Date: Aug 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

Hello,
I'm a new here. I have a racing Prop question and was told This is the place to come for the answer so...here I am.
I have a PAIR ( RH / LH) of ROLLA 4-Blade Stainless Racing props. 16 3/4 X 22 and 16 3/4 X 21...Really nice clean props.
They Have 26 Splines and Thats all I know about them. MY biggest question: What Drives will these fit?
I thought SpeedMaster but I saw that Speedmaster drives use 19 Spline Props.
Thanks for the help!
TC / Diggerman
I'm a new here. I have a racing Prop question and was told This is the place to come for the answer so...here I am.
I have a PAIR ( RH / LH) of ROLLA 4-Blade Stainless Racing props. 16 3/4 X 22 and 16 3/4 X 21...Really nice clean props.
They Have 26 Splines and Thats all I know about them. MY biggest question: What Drives will these fit?
I thought SpeedMaster but I saw that Speedmaster drives use 19 Spline Props.
Thanks for the help!
TC / Diggerman
#3
Registered
Thread Starter
Join Date: Aug 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts

By the way...these props aren't "Hot". I aquired them as a Go-with in a (non -racing) boat deal. I restore boats mostly commercial work boats and will be the first to admit that I don't know much about O.S. Race boats.
Totally Legit Props though. (Wanted to make that clear and not leave the wrong impression).
Thanks,
Tim / diggerman
Totally Legit Props though. (Wanted to make that clear and not leave the wrong impression).
Thanks,
Tim / diggerman
#4
arneson-industries.com


The only odd thing about these are pitch. 21" pitch and 22". I think these are actually a 25 tooth spline not a 26 tooth as there is little call for such a small pitch unless someone is running a diesel or a 1:1 ratio.
If you got them with a boat, what drives were on the boat?
If you got them with a boat, what drives were on the boat?
Thread
Thread Starter
Forum
Replies
Last Post
diggerman
General Boating Discussion
6
08-31-2006 05:28 PM