You were almost screwed worse. I'm sorry, I assume you have something that you can't say the name. But I can.

Roccard Engines Sucks

I fyou want me to delete the name, I will.

Delete what????

I don't see anything

These came out of my Gen 5 that had 6 hours after the oil pump fell off and supposebly were tanked,cleaned,and re-bearinged.What are you thoughts?

That the metal floating around screwed the bearings, or that they were never changed in the 1st place.

The metal had to come from the old cams,the ones that the lifters installed backwards and ground groves into the lobes.Both motors were this way as well as both cams.

Yup!

Nice "custom" balance work he did to the big end of the rod.

Hopefully this first engine builder who appears to be INCOMPETENT slithers away and doesn't STEAL anyone else's hard earned cash. I have been burned on a smaller scale before so I completely understand,Smitty

Maybe that's why he was so insistent that all your noises where just because ' the rocker arms just need to be adjusted'

I really can't believe that there is more stuff you guys are uncovering. Unbelievable.

Good news is that you are going forward with this project, no longer backward.

You made a good decision to 'pony up' and switch places. Most of us would have fell for the schit and just brought them back for further degression.

And yes, your info has helped others in making choices already.

The funny part is that back on 8/22/06 I sent him the pictures and the findings after we ripped the motors apart,just to show him what he gave me.I also asked him to reconsider the deal and try to help me out of this situation.But till this day not a word.I would have been happy with a"sorry,but we already have a deal" or something,maybe offer the help out with the extra machine work that needs to be done.The best part is that he requested those cams and lifters back because he says there is nothing wrong with either of them and he will reuse them .I feel sorry for the next sucker


Nordic95