Offshoreonly.com
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Engine building guru ?'s (https://www.offshoreonly.com/forums/general-q/139677-engine-building-guru-s.html)

the duke 09-07-2006 06:05 PM
Re: Engine building guru ?'s
 
Originally Posted by axapowell
As far as SW, you praised me for my build, and I was asking questions about what has worked for others, like most people would. Do not question my ability. It was MY checkbook that bought my parts after many opinions. I did not go with a combination that was always popular, but the results prove it all.

I'm gone for the weekend BOATING.....later
I'm well aware of what you did and didn't do with your motors. I'm impressed that your CHECKBOOK bought them. Try some grease and a wrench before you start claiming to be an expert.

Go for the weekend. When the game isn't played your way, take your ball and bat and go home.

axapowell 09-07-2006 06:20 PM
Re: Engine building guru ?'s
 
What you don't know (besides the facts).....stop by for a cocktail and I'l learn you something....

Dave

the duke 09-07-2006 06:32 PM
Re: Engine building guru ?'s
 
Originally Posted by axapowell
Alright Doug
mutiple screen names (Zone 5, Formula Fastech, Summit987) and mutiple personalities and go away!
Very close, but no cigar :drink:

Yes, I know Doug, He lives several miles from me. and I know the screen names you listed. But I believe that Zone 5 is on BF's, formulafastech was on SW. No law that I know of in using different screen names on different boards.

I believe that he got tossed from SW aruging on your side against others opinions when you built your motors.

the duke 09-07-2006 06:33 PM
Re: Engine building guru ?'s
 
Originally Posted by axapowell
What you don't know (besides the facts).....stop by for a cocktail and I'l learn you something....

Dave
How much HP and what top end did you finally get out of the 353?

TwinTurboStroker 09-07-2006 07:38 PM
Re: Engine building guru ?'s
 
http://www.turbomustangs.com/smf/Smi...lt/popcorn.gif

otis311 09-08-2006 12:41 PM
Re: Engine building guru ?'s
 
Wow !! X 2

JCPERF 09-16-2006 02:57 AM
Re: Engine building guru ?'s
 
Hope to bring this to a close

nordic95 09-16-2006 07:02 AM
Re: Engine building guru ?'s
 
Originally Posted by JCPERF
Hope to bring this to a close
What in the he!! are you doing on here at 4:00 am. Go get some sleep from now till Monday,I need you fresh on my dyno session. :D :D


Nordic95

articfriends 04-30-2011 05:16 PM
Originally Posted by nordic95 (Post 1855949)
Thats what it is turning out to be,only a couple of hours run time after full machine work and rebuild now its back out and needs all machine work done again to make it right,almost sound like "He" got ripped off and didnt get what he paid for from first builder.But thats just my opionon.


Nordic95
Did you ever get the rest of the problems fixed that were caused by the first incompetent engine builder, after the original thread got deleted we never heard, Smitty


All times are GMT -5. The time now is 05:55 AM.
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.