are all bravo couplers the same?
 

are all round style bravo one coupler the same? i need one for a mark4 454. thanks

Re: are all bravo couplers the same?
 

there are two types for the bravos,the standard one has the aluminum insert and the heavy duty has the steel insert.the standard works perfect for most applications.

Re: are all bravo couplers the same?
 

so this should work then


http://cgi.ebay.com/ebaymotors/MerCr...spagenameZWDVW

Re: are all bravo couplers the same?
 

I was told by my engine builder not to use the steel insert for a normal application. Ive got warmed over hp500's and i use the aluminum.

Re: are all bravo couplers the same?
 

Yes it will work

Re: are all bravo couplers the same?
 

I have a couple used one that I replace with the new style the ar in ok condition never spun have a ltlle rust on them.
They were from 500 hps and I replace them just as insurance as I was upping the motors horse power and did not want to take a chance

let me know if you are interested

Re: are all bravo couplers the same?
 

I have one never used $200 shipped to your door.

Re: are all bravo couplers the same?
 

Marty .... I'm interested in the Coupler .. Is it the new style with grease fittings ? Steel Or Aluminum ?

98itrwhite .. has first shot ... thanks... mike

Re: are all bravo couplers the same?
 

Beware of used couplers on e-bay. I have been stiffed at least twice. One was advertised as in new condition.
Use the spline grease, and clean and inspect any used coupler and install with Merc. factory alignment tool. BBB

Re: are all bravo couplers the same?
 

thanks for all the response's. i found one local. i am trying to get it back togather for a final run this weekend. thanks again guys :drink: