foot rests
#2
Member #154
Platinum Member
Join Date: Oct 2000
Location: SW CT & Long Island Sound
Posts: 7,879
Received 864 Likes
on
317 Posts
Re: foot rests
If you're talking about an angled footrest similar to the built-in footrest in a Cigarette I've been looking for the same thing. I'm probably going to make one out of marine plywood then have it shot with rhino lining or similar. I can't find one pre-made anywhere.
#5
Registered
Re: foot rests
Last edited by BY U BOY; 10-28-2006 at 09:37 PM.
#9
Registered
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
Re: foot rests
I made mine with 1/4" marine plywood. I made nice gussets and glued it well. I then covered with fiberglass resin all over and even used a little glass mat in some areas. I then covered it with the same red carpet as my snap-in. It's still like new. Looks great and works perfectly. Less than $50.00 total.
#10
Gold Member
Gold Member
Re: foot rests
I never seen them for sale anywhere. I made my own out of 2x6, 2" angle iron, and starboard.
http://www.offshoreonly.com/forums/s...ight=foot+rest
http://www.offshoreonly.com/forums/s...ight=foot+rest