Putting an EFI Whipple on an NA HP500
 

Is this as easy as it sounds? The EFI kits bolt to the block, they come with the wiring harnesses and I'd just need a computer. Right?

What am I missing? Who's done it?

Re: Putting an EFI Whipple on an NA HP500
 

For the most part yes as long as it comes with the pcm, harnes to hook up to your engine, also If you are running stock(cast) psitons, I would recomend running too much boost, other then that you should be ok

John

Re: Putting an EFI Whipple on an NA HP500
 

make sure of the corect type and amount of additional senders

Re: Putting an EFI Whipple on an NA HP500
 

You can buy the entire kit from Whipple. I called them about it a few months back when I was considering EFI Whipples on my HP500's. I think it was priced about $11k.

Re: Putting an EFI Whipple on an NA HP500
 

Find a local dealer for a better price,

Yeehaw . . .any movement on the headers?

Re: Putting an EFI Whipple on an NA HP500
 

You must be getting a hell of a deal if its priced at $11k. :D

Re: Putting an EFI Whipple on an NA HP500
 

$11M each most likely with delivery and computers.

Re: Putting an EFI Whipple on an NA HP500
 

Each :D

Pantera28-650HP... see PM

Re: Putting an EFI Whipple on an NA HP500
 

I've already killed that price complete and delivered.

Re: Putting an EFI Whipple on an NA HP500
 

just watch youe engines guys, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,POOOFFFFFFFf ffff.....