Fuel rail question
12-15-2006, 10:58 AM
#1
Registered
Thread Starter
Join Date: Nov 2006
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Fuel rail question
I have an AS&M TPI intake, based on the HP500 design. I need fuelrails for it and can't find anyone with a spare set.
Are there any other options for fuel rails aside from ordering new from AS&M? Is the injector spacing such that another set or kit would work? I'm new to TPI and while this may be obvoius, I'd appreciate comments from those more knowledgable.
I'm not adverse to making a set if anyone has any links or details on that.
Thanks!
Are there any other options for fuel rails aside from ordering new from AS&M? Is the injector spacing such that another set or kit would work? I'm new to TPI and while this may be obvoius, I'd appreciate comments from those more knowledgable.
I'm not adverse to making a set if anyone has any links or details on that.
Thanks!
12-16-2006, 12:10 AM
#2
Platinum Member
Platinum Member
iTrader: (1)
Re: Fuel rail question
You can build a set of twin rails fairly cheap,I built mine for 40$ worth of rail stock,50$ to have injector holes bored on a mill,Smitty
