|
cmi E tops
Im wanting to purchase some CMI headers . But I have a concern . I am running 572 tall decks with Brodix aluminum heads . Is there enough room between the 2 engines to install these headers. I currently run Merc Manifolds. When they were installed the Merc letters had to be ground off to fit . Are CMI,s any narrower?I run a 34 inch crankshaft centerline if this helps.The merc manifolds make 100% contact at the centerline of the boat .Tight as hel_ ..If CMIs wont work what will ? Thanks for the info ..
|
Re: cmi E tops
Originally Posted by boatman747
(Post 2002918)
Im wanting to purchase some CMI headers . But I have a concern . I am running 572 tall decks with Brodix aluminum heads . Is there enough room between the 2 engines to install these headers. I currently run Merc Manifolds. When they were installed the Merc letters had to be ground off to fit . Are CMI,s any narrower?I run a 34 inch crankshaft centerline if this helps.The merc manifolds make 100% contact at the centerline of the boat .Tight as hel_ ..If CMIs wont work what will ? Thanks for the info ..
You might want to call Randy Lieder@CMI to verify.920-722-7084 Fred |
Re: cmi E tops
I did talk to Randy. He was alot of help ..Thanks
|
| All times are GMT -5. The time now is 12:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.