cmi E tops
01-24-2007 | 08:10 AM
#1
Thread Starter
Registered
Joined: Mar 2004
Posts: 211
Likes: 0
cmi E tops
Im wanting to purchase some CMI headers . But I have a concern . I am running 572 tall decks with Brodix aluminum heads . Is there enough room between the 2 engines to install these headers. I currently run Merc Manifolds. When they were installed the Merc letters had to be ground off to fit . Are CMI,s any narrower?I run a 34 inch crankshaft centerline if this helps.The merc manifolds make 100% contact at the centerline of the boat .Tight as hel_ ..If CMIs wont work what will ? Thanks for the info ..
01-24-2007 | 10:46 AM
#2
Registered
Joined: Oct 2000
Posts: 2,713
Likes: 1
Re: cmi E tops
Im wanting to purchase some CMI headers . But I have a concern . I am running 572 tall decks with Brodix aluminum heads . Is there enough room between the 2 engines to install these headers. I currently run Merc Manifolds. When they were installed the Merc letters had to be ground off to fit . Are CMI,s any narrower?I run a 34 inch crankshaft centerline if this helps.The merc manifolds make 100% contact at the centerline of the boat .Tight as hel_ ..If CMIs wont work what will ? Thanks for the info ..
You might want to call Randy Lieder@CMI to verify.920-722-7084
Fred
