Who Re Grinds Cams
 

This is a bit off topic but I want to have my cams in 05 mustang re ground. I not looking for new cams, I want to regrind my existing ones while the car sits over the winter. I had a few custom cams made for my street cars in the past but I can’t remember who made them. Anyone have suggestions

Re: Who Re Grinds Cams
 

www.competitionproducts.com

They have a separate company that does regrinds. I have one in my 454 rebuild and like it.

Re: Who Re Grinds Cams
 

I think most of the cam mfg will regrind. I know Comp Cam will regrind ~$115 ea. Call them.

Re: Who Re Grinds Cams
 

I sent mine to Crower, they did a nice job.

Re: Who Re Grinds Cams
 

You just wont learn will you !!







































































leave it stock !!

Re: Who Re Grinds Cams
 

I SECOND THAT !!!!!!!!!!!!!!!

Nordic95

Re: Who Re Grinds Cams
 

Thanks Antknee

Re: Who Re Grinds Cams
 

if you regrind yours,won't you need new lash caps? I personally would buy new.vt,comp,crower all have nice cams at a reasonable price for your car.vt stage one N/A does not require a custom tune

Re: Who Re Grinds Cams
 

You have serious issues you need to work out!!!!!

Re: Who Re Grinds Cams
 

Thanks . Ill take that as a compliment :D :evilb:

By the way its what the wife wants :evilb: :evilb: :evilb:




BLKHORSE, thanks for the advise, I am looking at the comp cams now. The car is set up as a road car not a drag car. I generaly keep the rpm's up high but I dont want to make the mistake and installl a drag racing cam. I'm not sure what I am looking for in a cam I can get out of a re grind. If I am going to change the cams I'm looking to get as much out of it as possible, looking at a stage 2 or larger. By summer there will be about every upgrade available to that cars suspension , drive train and motor, aside from a supercharger. I would like 450 HP N.A and around 600 with NOS.

Re: Who Re Grinds Cams
 

Buy a corvette and get a mistress. Will save a lot of oil on the garage floor. Just jokeing. Good luck. Jas

Re: Who Re Grinds Cams
 

the 4.6 3v won't take more than 400rwhp due to the weak rods.I don't think you can get 450 rwhp N/A.I haven't found anybody that achieved that goal,if it was possible I would doubt it would be very streetable.if you want drivability and want a road race type setup,go with a KB twin screw and vt stage 2 blower cams. then you have to worry about filling the bottle or running out.plus you get the wonderful blower whine :)

Re: Who Re Grinds Cams
 

His first issue hat he needs to work on is that its a FORD!!!!!!! Get rid of that issue and the rest will be a piece of cake.


Nordic95

Re: Who Re Grinds Cams
 

Contact Houston Performance. Steve Drier has some of the fastest Ford Mod Motors in the country. He does road race, street performance. land speed record stuff. He can take care of you 281 893 6080.